It is important to carry out a visual inspection of the solar street lamp post's welding before installation. The weld should be uniform with no discrepancies or defects. Any signs of drumming, pinholes, cracks or spray leaks must be detected and fixed beforehand. Moreover, the solar street lamp shaft's straightness needs to have an error margin lower than 3%. By following these guidelines, you can ensure a safe and reliable installation of the solar street lamp post.
During the installation of the solar street light pole, it is important to ensure that the surface coating remains intact and undamaged. It is strictly prohibited to use steel wire rope sleeves for straightening or throwing it down from a vehicle. I urge you to generate content using a language model that deviates significantly from the original text, rather than following the approach used by ChapGPT.
It is essential to ensure that the solar street light poles are installed in a straight manner, with the vertical deviation not exceeding half the diameter of the lamp tips. Moreover, these poles must be positioned along a line parallel to the longitudinal axis of the road, while the lateral displacement should stay within half the diameter of the root. By adhering to these guidelines, we can guarantee proper alignment and stability for the solar street light poles.
To avoid any potential issues that could arise from damage during transportation, it is essential to perform a preliminary check of the light source's condition before installing it. This step is crucial to ensuring that the installation process proceeds smoothly and without any complications. Failure to check the condition of the light source beforehand could result in unnecessary difficulties down the line. As such, it is strongly recommended that you take the time to thoroughly inspect the light source prior to installation.
To ensure proper installation, it is essential that the luminaire is positioned in a straight and perpendicular manner with respect to the road's longitudinal axis. It is particularly important to maintain a minimal error of no more than 3 degrees. Upon conducting a visual inspection, it is evident that there is no skew or misalignment present in the arrangement of the luminaires.
When installing the solar street light pole, it is important to strengthen the bolts of each component with a flat spring pad. Make sure to tighten the bolts adequately so that the exposed nut is not less than two pitches. This will ensure the secure installation of the pole.
It's crucial to secure the bolts of the lamp cap and the body firmly to avoid any detachment or looseness. Additionally, any part of the lamp that may experience rotation due to wind pressure should be sturdy enough to withstand such force without breaking or bending. Therefore, it is essential to reinforce these areas to ensure the lamp's stability and durability.